PCL

Main Models

PCL Main Models

 The following models are only our main models. There are much more other models other than those listed down below.

If you are looking for some other specific models or need some customization (such as needle type, needle gauge, needle length, suture USP, suture length, needle hub type),  please feel free to contact us.

 Considering our stock condition, there could exist some MOQ (minimum order quantity) for our non-major models.

Supported Types

Model & Needle & Needle Hub

Supported Needle
Type

Supported Needle Hub
Type

PCL Cog B

Cog B (Cog)(Cog Base)

1. PCL Cog B

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

* Default cog type : CB4 (Please refer to the list below)

 

* We usually manufacture Cogs in 4 ways.

CB1 (ST, Straight Type) – in one direction

CB2 – 2 directions in 180º degrees

CB3 – 3 directions in 120º degrees

CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)

 

Cog-B L-Cannula 19G 38mm 0-0 120mm (Major model)

Cog-B L-Cannula 19G 60mm 0-0 140mm (Major model)

Cog-B L-Cannula 19G 100mm 0-0 180mm (Major model)

PCL Cog N

Cog N (Cog Nose)

2. PCL Cog N

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

* Default cog type : CB4 (Please refer to the list below)

 

* We usually manufacture Cogs in 4 ways.

CB1 (ST, Straight Type) – in one direction

CB2 – 2 directions in 180º degrees

CB3 – 3 directions in 120º degrees

CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)

 

Cog-N L-Cannula 20G 38mm +2 52mm (Major model)

Cog-N L-Cannula 20G 60mm +2 82mm (Major model)

Cog-N L-Cannula 21G  38mm 0-0 52mm (Major model)

Cog-N L-Cannula 21G 60mm 0-0 82mm (Major model)

Cog-N L-Cannula 22G 60mm 2-0 82mm (Major model)

PCL Mold B

Mold B (Mold)(Mold Base)

3. PCL Mold B

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

 

Mold B L-Cannula 18G 60mm +2 140mm (Major model)

Mold B L-Cannula 18G 100mm +2 180mm (Major model)

PCL Mold N

Mold N (Mold Nose)

4. PCL Mold N

* Default needle type : L-Cannula needle

* Default needle hub type : Assembly hub

 

Mold N L-Cannula 20G 38mm +2 52mm (Major model)

Mold N L-Cannula 20G 60mm +2 82mm (Major model)

PCL Twin Cog

Twin Cog

5. PCL Twin Cog

* Default needle type : Blunt needle

* Default needle hub type : Assembly hub

* Default cog type : CB4 (Please refer to the list below)

 

* We usually manufacture Cogs in 4 ways.

CB1 (ST, Straight Type) – in one direction

CB2 – 2 directions in 180º degrees

CB3 – 3 directions in 120º degrees

CB4 (SP, Spiral Type) – 4 directions in 90º degress (Major type)

 

Twin Cog Blunt 19G 110/120mm +1 340mm (Major model) 

Twin Cog Blunt 19G 110/120mm 0-0 340mm (Major model)

 

Twin Cog Sharp/Blunt 19G 70/80/90/110/120mm 0-0/+1/+2 220/260/300/320/340/360/380/400/420/440/460/480/500mm

 

Sharp needle type is only available in non-EU countries.

PCL Twin Mold

Twin Mold

6. PCL Twin Mold

* Default needle type : Blunt needle

* Default needle hub type : Assembly hub

 

Twin Mold Blunt 19G 110mm +2 340mm (Major model)

Twin Mold Blunt 19G 110mm +2 500mm (Major model)

 

Twin Mold Sharp/Blunt 19G 70/80/90/110/120mm 0-0/+1/+2 220/260/300/320/340/360/380/400/420/440/460/480/500mm

 

Sharp needle type is only available in non-EU countries